Some would call it lazy, others would call it convenient and still many would deem it a security feature, but no matter what class you fall into, wireless light switches are gaining in popularity.

These switches come in an assortment of styles and uses. Some you plug into an outlet, others, you plug the lightbulb directly into and then there’s one or two that actually serve as the lightbulb.

Below, you’ll find a list of the top ten best wireless light switch and what distinguishes each from the other. This list is sorted, predominately, by consumer satisfaction.

Top 10 Best Wireless Light switch reviews

10. AmerTac RFK100LC Westek Wall Mounted Switch and Plug-in Receiver

Buy now

This very simple unit from AmerTac plugs into an ordinary wall outlet and then you plug your lighting device, or any other device you’d like to control for that matter, into the receiving unit. The switch panel can be installed anywhere within 100 feet of the receiver using the provided mounting screws. The unit operates using wireless Radio Frequency (RF) that can usually transmit through and around solid objects. For instance, if you need to install the switch around a corner from the intended lamp, the unit should work thanks to the RF control.

The light switch plate comes equipped with the required 12-volt battery so all you’ll need to do is secure it to the desired location on the wall. This unit uses a toggle switch instead of the ordinary flip switch.

Pros:

· Product is easy to install; you don’t have to connect any wires inside the wall.

· Radio Frequency (RF) is used which gives you 100 feet of range between the switch and receiving outlet.

· The light switch can connect to up to three different receiving units.

Cons:

· Two-pronged plugs are only accepted by the receiving unit; therefore only smaller devices can be used.

· Some customer reviews state that their units inexplicably stopped working after less than a year.

9. WeMo Light Switch, Wi-Fi enabled, Works with Amazon Alexa

Buy now

You have smartphones and now you have smart switches. That’s exactly what the WeMo light switch is. This unit comes with a switch unit that connects to your existing light switch wires. They also offer a separate outlet unit that provides the same features as the switch device.

Once the switch is installed with the appropriate wires connected, using the WeMo app on your smart phone, you can connect the switch to your home Wi-Fi and then control it from anywhere in the world via the app. The unit can also be voice-activated using Amazon’s Echo product and can integrate with the Nest Thermostat. Even with all of this wireless amalgamation, the switch plate can still be operated as you would a normal light switch.

Pros:

· WeMo light switch works with your home Wi-Fi network.

· In addition to manually controlling the switch, you can also control it using an application on your phone.

· The WeMo switch can also connect with Amazon’s Echo and the Nest Thermostat for a streamlined experience.

Cons:

· There is some electrical work to be performed. You have to connect this to your existing light switch wires.

· Some customer reviews state that they have issues with the WeMo switch staying connected to their Wi-Fi network.

8. GE Z-Wave Wireless Smart Lighting Control Smart Switch

Buy now

The GE Z-Wave lighting control system utilizes one of the newest device-communication technology called Z-Wave. It’s another type of wireless communication technology, similar to Radio Frequency (RF) but it’s designed to work alongside your home Wi-Fi signal and it allows devices with the Z-Wave technology to talk to one another. Because it uses your Wi-Fi, most Z-Wave compatible products can be accessed anywhere in the world.

Additionally, devices that feature the Z-Wave technology can be configured by a growing list of smartphone applications including Wink, Alexa, Pulse, Honeywell, Smart Security and many more.

GE offers Z-Wave light switches and outlets. All of these will require connecting to your home’s current light switch wires. You’ll also need to decide on an app to use when the devices are installed. However, the devices will function normally without the use of a smartphone application.

Pros:

· The GE Z-Wave switch works with your home Wi-Fi network.

· In addition to manually controlling the switch, you can also control it using an application on your phone.

· The device uses Z-Wave technology which works alongside your Wi-Fi network and can talk to other Z-Wave electronics.

· The phone application allows for many different programming modes that can have your lights/electronics activated and deactivated automatically.

· You can connect a limitless number of GE Z-Wave devices to the one switch.

Cons:

· There is some electrical work to be performed. You have to connect this to your existing light switch wires.

· Because of the numerous phone apps that you can use to automate your Z-Wave devices, choosing the right one for you can be taxing.

7. TP-Link Smart Wi-Fi Light Switch

Buy now

As is the case with so many other wireless switches, the TP-Link’s smart Wi-Fi light switch also uses your home Wi-Fi. This enables you to control and program with a smartphone or tablet application. And like the others, it too is compatible with Amazon’s Echo to allow for voice control of the light switch. In case you’re new to the Echo unit, basically all you would have to say is “Alexa, turn on the living room lights,” and if installed correctly, your TP-Link smart switch will activate your lights.

TP-Link also offers smart wall outlets with the same smart technology potential as the light switches. What separates TP-Link from other wireless switches is the fact that they have developed their own smart application (Kasa) for you to use exclusively with their smart devices.

Pros:

· The TP-Link switch works with your home Wi-Fi network.

· In addition to manually controlling the switch, you can also control it using an application on your phone.

· The device uses a dedicated app called Kasa that was developed for the unit.

· The TP-Link switch can also connect with Amazon’s Echo for a streamlined experience.

· The Kasa application provides many different programming modes for home device automation.

· You can connect a limitless number of TP-Link devices to the one switch.

Cons:

· There is some electrical work to be performed. You have to connect this to your existing light switch wires.

· Users are restricted to using only the Kasa phone app with the unit.

6. GE Wall-Switch Light Control Remote with Outlet Receiver

Buy now

Sometimes, less is more. This is the case with the GE wireless light control unit. There are no wires to connect, no internet connectivity to worry over, no smartphone application to fret about, you simply plug the receiving outlet unit into an ordinary home outlet. Then, you plug any device of your choosing, most choose lights, to plug directly into the receiving outlet. Next, you install the switch plate to a desired location and voila, hit the switch to activate your device. Unlike our number ten light switch, the GE receiver does allow for three-prong plugs. It also uses Radio Frequency to communicate with the switch so make sure it’s within 100 feet.

Pros:

· Product is easy to install; you don’t have to connect any wires inside the wall.

· Radio Frequency (RF) is used which gives you 100 feet of range between the switch and receiving outlet.

· The unit can handle larger electronics that utilize three-pronged (ground) plugs.

Cons:

· Only one receiving outlet can be used per light switch.

· Some customer reviews expressed disdain for the blue light emitted by the receiving outlet.

5. JTD Energy Saving Auto-programmable Wireless Remote Control Outlet Switch

Buy now

Much like the previous review, this is another less-is-more unit but with the benefit of adding many more devices and controlling all of them with a single remote control rather than a wall-mounted switch plate. You can purchase a single receiving outlet or up to five outlets that can be controlled with a single remote. The outlets allow for three-pronged plugs, and have a 240 voltage rating. These are also controlled using Radio Frequency but with a 200-foot limit instead of the typical 100-foot threshold.

JTD markets these devices with power consumption in mind. Because of the higher voltage rating, they encourage you to plug your bigger devices, like your toasters and coffeemakers, into the receiving outlets to be shut off when not in use. This eliminates sources of “vampire” power usage where devices still use a percentage of your utilities while in standby mode. Some studies have even found that standby power consumed more than ten percent of the user’s electricity.

Pros:

· The JTD unit is operated using a single remote controller.

· Product is easy to install; you don’t have to connect any wires inside the wall.

· Powerful Radio Frequency (RF) is used which gives you 200 feet of range between the switch and receiving outlet.

· There are no wall plates to mount because it uses a remote controller.

· Multiple devices can be used with the single remote.

Cons:

· Many customer reviews stated the product feels cheaply constructed.

· Some customer reviews also stated that their units quit working after a few months.

4. Philips Hue Wireless Dimmer Kit

Buy now

Philips provides a new twist on wireless light switches with their wireless dimmer kit. This system enables you to install up to 10 of Philips’ unique Hue bulbs throughout your house. Once installed, each bulb has a special identifying code that it uses to connect wirelessly to your internet and subsequently a smartphone application. Here, you can independently control each bulb and each bulb’s level of brightness. Philips has a whole Hue family of bulbs and lighting accessories that can be controlled by combining their Hue Bridge device in tandem with its smartphone application. This enables users to program a litany of different lighting features through their home on a specified schedule. Philips Hue products are widely available online and in most retail centers.

The wireless dimmer switch included with this product is easily mounted onto any wall with the actual dimmer buttons attached to the faceplate by magnets, allowing users to remove it and carry it around as a remote control. The best part about these bulbs is they use LED technology to provide a whiter and more energy efficient light.

Pros:

· The Philips unit is operated using a single remote controller.

· Product is easy to install; you don’t have to connect any wires inside the wall.

· The product uses energy efficient LED bulbs with dimming capabilities.

· There are no wall plates to mount because it uses a remote controller.

· Multiple bulbs can be used with the single remote switch.

Cons:

· The handheld dimmer switch can only be used to control all the lights in a given room. You can independently control each like without purchasing the Hue Bridge; additional hardware that allows the devices to connect to your Wi-Fi network.

3. Magicfly Wireless Remote Control Outlet Light Switch

Buy now

Magicfly’s wireless remote controlled outlets are very similar to the previous reviewed JTD outlets. In fact, Magicfly also offers a single remote control to operate up to 5 receiving outlets. These outlets also feature the convenient three-prong capabilities. Making Magicfly’s devices unique is the option to control individual devices plugged into the outlets, or to turn all of them on or off at one time.

Magicfly also educates on the importance of shutting off devices and saving yourself from paying for “vampire” power consumption. Unlike JTD’s devices, these outlets can only handle up to a 120 voltage rating.

Pros:

· The Magicfly unit is operated using a single remote controller.

· Product is easy to install; you don’t have to connect any wires inside the wall.

· Radio Frequency (RF) is used which gives you 100 feet of range between the switch and receiving outlet.

· There are no wall plates to mount because it uses a remote controller.

· Multiple devices can be used with the single remote.

· The remote grants you the ability to control devices independently or collectively.

Cons:

· Some customer reviews stated that the remote quit working after a year or two.

2. Woods Indoor Plug-in Wireless Remote Control

Buy now

The Woods indoor, remote control system is another wireless outlet unit that utilizes receiving outlets to be plugged into wall outlets with subsequent devices of your choosing plugged into the receiving outlet. It uses Radio Frequency (RF) to communicate with the remote control. Using a single remote, you can activate and deactivate specific devices. There is no light switch wall plate to be installed and there are no wires to be connected.

The remote has a shortened RF range than our previous products of up to 60 feet. It’s the consumer satisfaction that makes this system the best so far. Hundreds of shoppers who purchased this unit have provided glowing remarks. Among other things, users gloat on the durability and strong feel of the devices.

Pros:

· The Woods unit is operated using a single remote controller.

· Product is easy to install; you don’t have to connect any wires inside the wall.

· Glowing customer reviews state that the device is long-lasting.

· There are no wall plates to mount because it uses a remote controller.

· Multiple devices can be used with the single remote.

Cons:

· The remote has a short RF range of only 60 feet.

· You have to control each device independently. There isn’t a switch to control all devices collectively.

1. Etekcity Wireless Remote Outlet Switch

Buy now

We’ve finally come to the best wireless light switch system. It doesn’t connect to the internet or use your Wi-Fi to control the devices on your smartphone, the Etekcity wireless outlets do cater to you. Unlike other wireless outlet systems, this one allows you to add countless outlets to the unit and still control all of them using a single remote. This is made possible by Etekcity’s learning function button located on each outlet. By pressing the button, you’re able to combine select devices plugged into those outlets and then activate/deactivate those devices with the touch of a button. Incredibly, it also works backwards. You can program multiple remotes to operate a single device.

The devices communicate via a strong Radio Frequency (RF) with a range of 100 feet. These outlets, when powered off, also eliminate the “vampire” power consumption.

Pros:

· The Etekcity unit is operated using a single remote controller.

· Product is easy to install; you don’t have to connect any wires inside the wall.

· Radio Frequency (RF) is used which gives you 100 feet of range between the switch and receiving outlet.

· There are no wall plates to mount because it uses a remote controller.

· Multiple devices can be used with the single remote and multiple remotes can be programmed to use on a single device.

· There are thousands of online, positive customer reviews.

Cons:

· The Etekcity wireless unit isn’t Wi-Fi capable so you can’t use your smartphone to control these devices.

I hope this list helps with your purchasing decision regarding wireless light switch. One thing to keep in mind when using any wireless device with internet access is the threat of those gadgets being hacked by outside parties. It’s always a good idea to educate yourself on ways of staying ahead of potential cyber-attacks.



  • 0/5
  • 0 ratings
0 ratingsX
Very bad! Bad Hmmm Oke Good!
0% 0% 0% 0% 0%

LEAVE A REPLY

Please enter your comment!
Please enter your name here